language：中文
Contact: sales@haomai.net
PUI-660 Digital simulation power source system
——Linear current and voltage power amplifier for power system simulation
Inquiry Now: sales@haomai.net
- Description
- Parameters
- Cases
- Downloads
- Videos
Description
- It can be used as the current and voltage power source for power system simulation to form a complete simulation system
- It can be used as current and voltage power amplifier for relay protection test
- Multiple output modes can be designed according to application requirements
- Good linearity, fast response, large power and strong load capacity
- It can output accurate load current and high small signal output accuracy
- Long-time continuous operation, stable and reliable
- Multiple display modes, key switch
- Voltage overload and current overtime protection
Parameters
| Current output | |
| Output current range | 6-phase 0-30A sine wave |
| Rated output current | 6-phase 5A sine wave |
| Gain characteristics (relationship between output current and input signal) | 8A/V |
| Nonlinear error between input signal and output current | less than 0.2% (0.2A-30A) |
| The total harmonic distortion rate of output current | less than 0.2% |
| Phase delay between output current and input signal | <20 μ S (50Hz signal) |
| Current amplifier step response | less than 100 μ S |
| Max. output power | 300VA/phase (when the effective value of 30A sine wave is output) |
| Load change rate of output current | less than 0.2% (0-2 Ω load resistance, output current 5A) |
| Sampling accuracy | |
| Indication error of current recovery | less than 0.2% (0.2A-30A) |
| Voltage recovery display error | less than 0.2% (2V-120V) |
| Phase display error | less than 0.2 ° (at 50Hz) |
| Voltage output | |
| Output voltage range | effective value of 6-phase 0~120V sine wave |
| Rated output voltage | effective value of 6-phase 57.74 V sine wave |
| Gain characteristics (relationship between output voltage and input voltage) | 20V/V |
| Frequency range of voltage amplifier | 0~1.2KHz |
| The input terminal input impedance | >10k Ω |
| Nonlinear error between input signal and output voltage | less than 0.2% (2V-120V) |
| The total harmonic distortion of output voltage | less than 0.2% (2V-120V) |
| Phase delay between output voltage and input signal | <20 μ S (50Hz signal) |
| Step response of voltage amplifier | less than 100 μS |
| The maximum output power of voltage amplifier | More than 65VA |
| Load change rate of voltage amplifier | 0.2% (1-30 VA output power, output 57.7 V) |
| Phase error between voltage and current | <0.2 ° at 50Hz |
24-hours hot line 400-099-8859 technical hot line： 13971234137
Copyright © 2024 All rights Reserved.
备案号：鄂ICP备05010718号-1
